
	Knowledge Base Maps Media Vault Member Registry Messageboard News
Saturday, 25 May 2013		Register \| Login

Message Board

Info	Message
Tech Forums > EFI & Tunes/Mappings > 955 ST remapping help
wjw Devon, United Kingdom Posts: 18 Enthusiast 16 May 2012 00:35	Have replaced an old unreadable map 10033 with latest standard trim map 10150 in an attempt to improve light throttle roughness amd occasional stallls but it has made it a whole lot worse. Am I missing something? I can't go back as 10033 wouldnt copy. Any ideas.? I have read threads pointing to 10078 in standard trim giving great smoothness.Any advise on this?

Advertisement Remove adverts by upgrading to a premier account

Tom Hamburg Hamburg, Germany Premier Member Posts: 515 Speed Triple 1050 16 May 2012 08:08	which VIN has your bike ? BR, Tom

wjw Devon, United Kingdom Posts: 18 Enthusiast 16 May 2012 08:24	Tom Hamburg: which VIN has your bike ? BR, Tom 92864

~EARL~ gods country wales, United Kingdom Premier Member Posts: 82,273 Speed Triple 1050 16 May 2012 08:39	did you do a tps reset after?

wjw Devon, United Kingdom Posts: 18 Enthusiast 16 May 2012 09:04	Yes. Followed the procedure as per guidance notes

Tom Hamburg Hamburg, Germany Premier Member Posts: 515 Speed Triple 1050 16 May 2012 09:05	wjw: 92864 - with standard exhaust or TORS ? - with or without closed loop catalyst? - if with closed loop catalyst, then use the 10077. for TORS use the 10078 for standard exhaust, without closed loop catalyst, use the 10150. Have you how Earl asked, made the TPS reset ? BR, Tom

wjw Devon, United Kingdom Posts: 18 Enthusiast 16 May 2012 09:34	I used 10150 as standard exhaust, no cat.

wjw Devon, United Kingdom Posts: 18 Enthusiast 16 May 2012 11:03	I used 10150 as standard exhaust, no cat.

Tom Hamburg Hamburg, Germany Premier Member Posts: 515 Speed Triple 1050 16 May 2012 12:44	Hi, Then it should fit and if you have the TPS reset done, it should work. Unfortunately I have no other ideas that may help you further. You really only have changed the map? Or have you performed still other work? BR, Tom

X-Man Chesterfield/Derbys, United Kingdom Posts: 19,480 Enthusiast 16 May 2012 13:01	sounds like a 02 sensor problem to me..

Tom Hamburg Hamburg, Germany Premier Member Posts: 515 Speed Triple 1050 16 May 2012 16:44	X-Man: sounds like a 02 sensor problem to me.. as far as I know, this model has no O ² sensor. Exception, if models from this model year have a regulated catalyst. Since this model has been made in two versions, with and without catalyst. BR, Tom

X-Man Chesterfield/Derbys, United Kingdom Posts: 19,480 Enthusiast 16 May 2012 18:21	In that case it probably needs the usual Throttle body balance, CO set and TPS reset.

wjw Devon, United Kingdom Posts: 18 Enthusiast 16 May 2012 20:13	Thanks. Will check balance ( why would this change?) sauce a co sensor and reset TPS. Anyone near Exeter, Devon with access to a gas analyser?

X-Man Chesterfield/Derbys, United Kingdom Posts: 19,480 Enthusiast 16 May 2012 20:40	Vibration mainly.

Tech Forums > EFI & Tunes/Mappings > 955 ST remapping help

Forum Jump:

Moderators: ~Bluelabel~ aka Aitch Animal Mother Deadloud Fozz Fruity Homertrix

Who's Online?
Guests:	51
Members:	6
Premiers:	5

Triumph Torque
- About Us
- Community Guidelines
- Contact Us
- Statistics

Site Information
- Site Help
- Site Status
- Site Updates

Member Information
- Login / Register
- Merchandise
- Obituaries

Site Access
- Web Home
- Mobile Home
- Smart Client